Features

*16 (8 Zone) Channel Power Amplifier
*High efficiency Class D amplification
*Each zone Stereo/Mono output selectable
*Bus Trigger--Input/Output triggers On/Off for all zones on the bus input
*Zone Trigger--Independent trigger Input/Output on each zone for On/Off
*Two sets of Bus Inputs/Outputs
*Independent Line input on each zone
*Bus/Line switch on each zone *Independent Volume control on each zone
*Audio sensing with 5 minute delay time per zone

Specifications

*Channels：16 channels, 8 independent zones
*Power Output：
    80W /Channel, 1KHz into 4 Ohms.
    50W /Channel, 1KHz into 8 Ohms.
    160W /Zone, 1KHz into 8 Ohms(Bridged)
*S/N：>90dB A-weighted
*Frequency Response：20Hz to 20KHz +1.7/-1dB at 1W output into 8 Ohms
*Minimum Impedance：Stereo Mode 4 Ohms, Bridge Mode 8 Ohms
*Input Sensitivity：
    600 mV for 80W @ 1 KHz 4 Ohms One Zone
    700 mV for 50W @ 1 KHz 8 Ohms One Zone
*Input Impedance：>22K Ohms Line Input
*Trigger Inputs/output：Bus In /Out. Each Zone In/Out 12VDC 100mA
*Zone Line Input：Line, Bus1 or Bus2 select switch per zone
*Bridge Mode：Select Stereo or Bridge mode per zone 8 Ohm only
*Speaker Connectors：Detachable speaker terminals support up to 14awg wire
*Standby mode：When audio signal or trigger is not present after 5 munites.
*Power Requirement:
    100-120VAC 60Hz 1200W Max
    220-240VAC 50Hz 1200W Max
*Fuse Rating：
    100-120V/T10A, 250V US
    220-230V/T5A, 250V Europe
*Dimension: 427mm x 88mm x 410 mm (WxHxD)
*Weight: 10KG

Documents