簡體 繁體 english menu
  • ABOUT
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Media Player
      • Power Management
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Power Amplifier w/Dante Interface
      • Two Channel Power Amplifier
      • Intelligent
      • Digital Speaker Management
      • Intelligent
    • Public Address
      • Amplifier
      • Speaker Selector
      • Dante
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
    • Pro Audio
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
  • NEWS
  • SERVICES
  • CONTACT
UR2312A





Single set of receiver (Active)




UR2312A


Single set of receiver (Active)

UR2312A module is designed to provide Microphone XLR output, and only receives the signal from one pair of CAT5 cable and then routs to XLR output. Before the installation, please determine which pair to receive the signal and set the A, B, C switch to properly position. Please also set HIGH/NORM Gain switch depends on the output level.

 

UR2312A receives the signal from one pair of the UTP CAT5 cable, this means the module could be connected with other receiver modules by the additional RJ45 jack on the rear panel. Two single pair of receiver modules or one two pairs of receiver modules could be chained together, each of connected module needs set to different pair A, B, C.

 

UR2312A module could be powered from a 24VDC power supply by using the rear panel terminal block, and the power also could be provided to all the connected modules by Pair D of UTP CAT5 cable. When the power is supplied to this module, the front panel LED will light on.

Features

• Balanced MIC XLR Output
• Selector switch MIC GAIN
• Switch Selects which Pair (A, B or C) Feeds the Output
• Signal and Power Pair Pass-through on RJ45 Jacks
• Power can be linked to the removable terminal
• Blue LED Indicates Module is Powered
• Daisy chain topology
• AFC Design  (AFC: Auto Feedback Gain Circuitry)

Specifications

•Input: CSP UTP RJ45
•Signal Pair Used: Switch-selectable A, B, or C
•Output: RJ45
•Output Impedance: 150 Ω balanced
•Output Connection: XLR
•Output Level: -45 dBu Mic or +4 dBu Line Level, Switch-selectable on rear panel
•Frequency Response: 10 Hz to 50 kHz (+/- 0.1 dB)
•THD+N: < 0.005%
•Noise below +4 dBu: < -90 dB
•Indicator: Power In
•Power Connections (2): Detachable terminal block; RJ45
•Power Requirement: 24 Vdc @ 45 mA plus connected loads
•Maximum Load Current: 155mA
•Dimensions: 1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D
•Mounting Box Minimum Depth: 2.4"

Documents