• NEWS
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Media Player
      • Power Management
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Power Amplifier w/Dante Interface
      • Two Channel Power Amplifier
      • Intelligent
      • Digital Speaker Management
      • Intelligent
    • Public Address
      • Amplifier
      • Speaker Selector
      • Dante
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
    • Pro Audio
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
  • 簡體 繁體 english

Three Sets Receivers (Active)


Three Sets Receivers (Active)

UR2612A module is designed to provide XLR output and RCA jack outputs, and receives the signal from three pairs of CAT5 cable, then routs one to XLR output and two to L/R channel of RCA outputs. Before the installation, Please set MIC/LINE switch depends on the output level of XLR connector.
UR2612A module could be powered from a 24VDC power supply by using the rear panel terminal block, and the power also could be provided to all the connected modules by Pair D of UTP CAT5 cable. When the power is supplied to this module, the front panel LED will light on.


•XLR / RCA Audio Output,
•Gain Switch XLR only
•Signals from Pair A(XLR), Pair B(L) and Pair C(R).
•Power can be linked to the removable terminal
•Blue LED Indicates Module is Powered


•Input: CSP UTP RJ45
•Connection: RJ45
•Twisted Pair Used: A, B, C pairs
•Outputs: 150 Ω Balanced; 100 Ω Unbalanced
•Output Connector: XLR (Balanced Mic or Line, switchable);
RCA Jacks 
•Output Level: XLR: -45 dBu Mic or +4 dBu Line Level
•RCA: -10 dBV
•THD+N: < 0.005%
•Frequency Response: 20 Hz ~ 20 KHz
•Crosstalk: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz)
•Power Requirement: 24 VDC @ 55 mA; 155 mA (Max.)
•Dimensions: 43mm x 66.5mm x 40mm (WxHxD)