menu
  • ABOUT
  • NEWS
  • FEATURED
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Media Player
      • Power Management
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Power Amplifier w/Dante Interface
      • Two Channel Power Amplifier
      • Intelligent
      • Digital Speaker Management
      • Intelligent
    • Public Address
      • Amplifier
      • Speaker Selector
      • Dante
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
    • Pro Audio
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
  • SERVICES
  • CONTACT
  • 簡體 繁體 english
PLA2Li




240W Power Amplifierr



PLA2Li


240W Power Amplifierr

PHOENIX-60EUUS
Stores, Resturants, Shopping Mall, Community, School, etc

Features

•Two Channels Model – 120W RMS/Per Channel

•Stereo into 4-8 Ohm loads.

•Bridged mode 240W output for 70V or 100V

•Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby

•RED LED (Front Panel) to indicated Standby mode is active.

•Terminal Block analog audio inputs.

•Selection for Power-Up mode.

•Switch for High Pass Filter.

•Natural cooling without Fan.

•TRIGGER could be external remote ON/OFF.

•Short circuit protection.

•Overheating protection.

•Optional accessory card slot for Dante Receiver.

Specifications

•Output Power:
120W x 2, 8Ω (31 V) RMS output, per channel @ < 1 % THD+N
120W x 2, 4Ω (22 V) RMS output, per channel @ < 1 % THD+N
240W, 70V @ < 1 % THD+N
240W, 100V @ < 1 % THD+N
•Frequency Response: 20Hz~20KHz, +/- 2 dB @ 4ΩLoad
•S/N: >90dB @ 1W(20Hz~20KHz)
•Input Sensitivity: 1.0V (+0dBu) @ Max Output 4Ω
•Input Impedance: >10K, Balanced.
•Max. Input Level: 12.3V (+24 dBu)
•Trigger In/Out: DC 12V
•High Pass Filter: 80Hz(±2dB)
•Input Connector: 5 pin Euro terminal
•Trigger Connectors: 3.5 mm Jacks
•Output Connectors: 4 pin Euro terminal (4Ω/8Ω)
2 pin Euro terminal (70V/100V)
•Power Requirements: AC 100V~240V, 50/ 60 Hz
•Power Consumption: 350W
•Dimensions: 214mm x 44mm x 249.8mm (WxHxD)
•Weight: 1.94 Kg

Documents