menu
  • ABOUT
  • NEWS
  • FEATURED
  • Products
    • Home Installation
      • Multi-Room Amplifier
      • Power Amplifier
      • Media Player
      • Power Management
      • Solution Boxes
      • Speaker Selector
      • Speaker
    • Intelligent Conference
      • Power Amplifier w/Dante Interface
      • Two Channel Power Amplifier
      • Intelligent
      • Digital Speaker Management
      • Intelligent
    • Public Address
      • Amplifier
      • Speaker Selector
      • Dante
      • CSP Transceivers
      • CSP Receivers
      • Solution Boxes
    • Pro Audio
      • Mixer
      • Headphone Amplifier
      • Guitar Tool
      • Mini Mixer
      • Direct Box
      • Mic Preamp
      • Phantom Power Supplier
      • Other Solution
  • SERVICES
  • CONTACT
  • 簡體 繁體 english
PRO 300

Stereo Amplifier

PRO 300

Stereo Amplifier

RCA-60BINDING POST

The McLELLAND Pro series stereo amplifier represent the state of art design. Featuring dual inputs with signal sensing, McLELLAND Pro series amplifier can be configured to turn on automatically when music is sensing on the inputs. The Input 1 will override Input 2 whenever the signal is present, this makes the Pro series the perfect amplifiers as a zone amplifier for multi room distribution system. Any time a local source is activated, it will take priority over the whole house audio by simply showing signal present at Input 1. Also, McLELLAND Pro Series Amplifiers have two pairs of speaker output to allow the amp to run a “ A” pair of speakers as well as an auxiliary “ B” pair of speakers and allows selection of either or both from the front panel of the amplifier. Moreover, the McLELLAND Pro Series Amplifiers can be switched on by the DC 12V trigger, which gives you the flexible -on options (only for Pro 200 & Pro 300).

 

Features

•Volume control.
•Balance control.
•A/B speaker switching.
•12VDC Trigger In/Out.
•3s~15s Delay time selection.
•Primary and Secondary audio inputs with auto source switching.
-Loop out on Secondary Line In pass through the audio signal to another amplifier.

 

Specifications

•Continuous Output Power(<0.2% THD+N): 150W per channel at 8ohms ; 225W per channel at 4ohms 470W bridged mono at 8ohms
•Signal-to-Noise Ratio: >93dB A-weighted
•Crosstalk: >70dB@1KHz, ref. to rated power@8ohms
•Frequency Response: 20Hz to 20kHz+0.0dB / -0.5dB@ 8ohms, 1W
•Input Sensitivity: 500mV for 150W at 8ohms
•Power Requirements: 120VAC 60Hz 10A ; 230VAC 50Hz 5.2A IEC320 type connector with 3 terminal detachable power cord.
•Dimensions (WxDxH): 16.5” x 13.7” x 5.2” (419 x 349 x 133 mm)
•Weight: 34.20lbs (15.4kg)

Documents

PRO 300